Description
Owl VCL & Carrier Membrane: Self-Adhesive Vapour Control for Irish Roofs
Condensation is one of the biggest threats to a flat roof’s insulation and structure, particularly in Ireland’s damp climate. Owl VCL & Carrier Membrane is a self-adhesive membrane made from SBS-modified bitumen, with glassfibre reinforcement and an aluminium foil facing. It blocks water vapour before it can reach the insulation and also gives the roof an extra layer of waterproofing.
It is designed for contractors, roofers and specifiers across Ireland. It installs without flame and forms the ideal base for the Lava 20 liquid waterproofing system on both new-build warm roofs and refurbishments.
Why Choose Owl VCL & Carrier Membrane?
- No hot works: peel-and-stick application with no flame and no additional adhesive
- Very high vapour resistance: Sd > 1,500 m, helping protect against moisture, mould and corrosion
- Long-term durability: elastomeric SBS-modified bitumen compound
- Cold-weather flexibility: remains flexible down to -25°C
- Bridges joints: accommodates slight substrate movement and acts as a bond breaker at joints
- Site-tough: resists tearing and stretching under foot traffic; the aluminium face stands up to UV, chemicals and impact
- Direct to Lava 20: no primer needed between the aluminium face and Lava 20
- Weather protection during the build: once correctly sealed, it can be left exposed for a few weeks before Lava 20 goes on
Where to Use It
Install it as a vapour control layer beneath insulation, especially on buildings that generate high levels of internal moisture:
- Factories and commercial units
- Swimming pools
- Sports halls and leisure centres
Use it in new warm roof construction, or as a carrier membrane over suitable existing roof decks during refurbishment. Always position and install it in line with the specified roof design.
Product Data
- Composition: Elastomeric SBS-modified bitumen
- Reinforcement: Glassfibre
- Top surface / underside: Aluminium foil / removable siliconised film
- Thickness: 0.5 mm
- Weight: 0.5 kg/m²
- Roll dimensions: 50 m × 1 m (50 m² nominal coverage)
- Vapour resistance (EN 1931): Sd > 1,500 m / μ > 2,680,000
- Tensile strength (MD/CD): 900 / 700 N/50 mm
- Nail shank tear resistance: 200 / 200 N
- Low-temperature flexibility: ≤ -25°C
- Watertightness: Pass
- Shelf life: 12 months from production
- Compliance: EN 13707, EN 13970, CE marked
Net coverage will vary with overlaps and detailing.
How to Install
- Check that the deck is dry, clean and free of oil and dust.
- For vapour control use, prime the surface with Lava 20 EPDM & TPO Primer (recommended), Lava 20 Fast Primer or an approved solvent-based bitumen primer, which is ideal in colder conditions. These options also suit OSB decks.
- Align the roll, peel back the siliconised film and press the membrane firmly into the primer while it is still wet or tacky. Don’t let the primer dry first.
- On details and upstands, start at the outlet and work towards the high end, lapping each piece by a minimum of 150 mm (6 in).
- Apply Lava 20 straight onto the aluminium face; no primer is needed.
Using another substrate or a spray adhesive? Contact our technical team first. The full Technical Data Sheet is available to download.
Storage
Keep rolls upright on a flat surface in a dry, shaded place away from heat and sunlight. Do not stack them, and leave the pallet wrapping closed until you’re ready to install.




